Personnel Protection Tunnel System and Safety Inspection Cage for Cimsa Cimento Sanayii – Kayseri and Mersin Plant

Bricking Solutions Personnel Protection Tunnel System provides a safe environment for workers from falling coating and brick inside your kiln.

The tunnel is designed to protect coating up to 113 kg (250 lb) from 455mm (18 in) with a 3:1 safety factor

Fabricated from 6061 T6 Aluminum with a steel mesh cover. On request, un-assembled can fit through most openings. Each tunnel section is 5 ft (1.5m) long and can be connected together as long or as short as needed

For 5.5m & larger kilns, a collapsible carrier is optional to attach to forklift for transportation and installation assistance
Each leg height can be adjusted in accordance with varying surfaces and thicknesses of a coated kiln

 The setup cage is the first cage assembled in the tunnel system. A castor on the setup cage rolls on top of the v-channel of a extension cage in preparation to assemble the next extension cage.

For manual installation >5.5m kiln, the larger Set up Cage is 8 ft (3M) long & rolls along the spine of the tunnel allowing each tunnel section to be set up under cover. The first cage in the tunnel system is the 5 ft (1.5M) long Inspection Cage. Which can also be used free standing as a portable safety cage for quick inspections and repairs.


Here at Bricking Solutions, we are always striving to advance our equipment for better efficiency and safety. We rigorously test our equipment to improve our designs.
or contact us or visit our website for more information