Bricking Machine >>

Suspended Platform >>

Kiln Access Ramp >>

Safety Inspection Cages >>

Personal Protection Tunnel >>

Port-A-Trac >>

Conveyor >>

Incline Conveyor >>

Bedding Cart >>

Material Basket >>

Radialign Laser >>

Burner Alignment Devices >>

Muck-it-Bucket >>

Fork Truck Bracket >>

Installation Tools >>



Bricking Machine Catalog (PDF)

Bricking Machine Data Sheet (PDF)

Forklift Clearance Data Sheet (PDF)

Parts Book PDF)



Request a Product quote now >>>



Domestic Parts Quote >>>

International Parts Quote >>>

Ez Flexx Bricking Machine, brick lining
Brick Lining machine, ez flexx50Photo Gallery

NEW EZ Flexx50 Bricking Machine 3.6M - 7.6M kiln Diameters (single machine has max 2M range)

The EZ Flexx50 is Bricking Solutions’ newest bricking machine. The flexible arch allows for easy adjustment inside the kiln for either minor kiln distortion, or to accommodate conical sections or ovality. The EZ Flexx50 Bricking Machine comes in any kiln size or range from 3.6m and up, or can be customized to your plant’s needs. With a wide variety of additional features for added efficiency, not only is it the safest bricking machine in the industry, it is also the best.

  • Frames and structural components manufactured from 6061-T6 aircraft grade aluminum
  • Lightest total weight in the industry
  • Components fold for easy storage
  • Symmetrical part design with pin connections for fast and easy assembly
  • Standard 4,000 kg (8,800 lb) load capacity and 4.3M (14’) work platform. Allows for 2 pallets of bricks (1,540 kg) plus men and equipment. Highest load capacity in the industry
  • Simple jack screws allow for easy adjustment of distance between arch and shell
  • Ergonomic Cut-Away Keying Section, exclusive to Bricking Solutions, gives the Key Mason easy access to down-kiln arch giving a clear view for critical key brick installation
  • Engineered cut-outs incorporated into arch panels for the lightest arch in the industry
  • New cylinders are field repairable

Ez Flexx50 Brochure (PDF) --  EZ Flexx50 Specification (PDF)

Ez Flexx Bricking Machine, brick lining
Photo Gallery

NEW Ez Flexx50 Bricking Machine Small 3M - 4M

The Ez Flexx50 Small is mini version of the standard Ez Flexx50. The only difference is the range and capacity

  • Standard 2,722 kg (6,800 lb) load capacity and 3.65M (12’) work platform. Allows for 2 pallets of bricks (1,540 kg) plus men and equipment. Highest load capacity in the industry
  • Full range from 3M - 4M or .5M ranges

Ez Flexx50 Small Brochure (PDF) --  EZ Flexx50 Specification (PDF)

Econ-O-Ring
Photo Gallery

Econ-O-Ring (ECOR)

The Econ-O-Ring (ECOR) is an adjustable, economically priced, medium duty machine designed to service kilns from 8'-0" through 12'-0" inside brick diameter (2.4m through 3.7m). The ECOR is a double arched adjustable bricking machine. With a unique adjustable frame system multiple hinged arch sections. This allows the ECOR to be adjusted to many different diameter combinations within its range.

The ECOR was designed for smaller kiln diameters. The ECOR comes complete with an assembly guide and sizing chart to assist you in determining the proper arch sections and adjusting the frames to the proper bricking diameter. It is manufactured out of lightweight aluminum and can be assembled in 60 minutes once inside the kiln. The ECON is constructed in small components and can be handled by two people. The machine is designed to fit into limited access kilns and can install insulated and active brick in lime kilns.
Econ-O-Ring Brochure (PDF)

Mini Econ-O-Ring
Photo Gallery

Mini Econ-O-Ring (MECOR)

The Mini Econ-O-Ring (MECOR) is an adjustable, economically priced, small duty machine designed to service kilns from 47" (1.2M) to 98" (2.5M) kiln diameter. The MECOR is a single arched adjustable bricking machine. Mini Econ-O-Ring can be used in burning chambers for paper mill drying kiln, tertiary return duct in a cement plant, satellite cooler tubes on a cement rotary kiln, and small vessel, kilns and furnances.

The MECOR comes complete with an assembly guide and sizing chart and has 6"(150mm) pneumatic cylinder stroke. It is manufactured out of lightweight aluminum and can be assembled in 30 minutes once inside the kiln. The MECON is constructed in small components and can be handled by two people. The machine is designed to fit into limited access kilns.
Mini Econ-O-Ring Brochure (PDF)

Torpedo Ladle Bricking Machine
Photo Gallery

Torpedo Ladle Bricking Machine

This bricking machine is designed for installation of refracotry in torpedo ladles for the steel industry. It replaces old fashion wood form and wedges and greatly reduces set-up and installtion time. The machine is designed and fabricated out of 6061-T6 aircraft aluminum with custom Aluminum Perf-O-Grip Planking and a 2,722 kg (6,000 kg) net capacity aluminum frame with rails to support trolley. Custom made flex arch with flexible hinge connections to allow arch wings to adjust toward and away from kiln wall Arch stabilizer post to adjust proper distance of arch from shell
Torpedo Ladle Brochure (PDF)